ECO-WORTHY 1000W 24V (400W Wind+6x100W Solar) Solar Wind Hybrid Kit + Choose Your Package
If you are looking for a hybrid kit, ECO-WORTHY 1000W 24V expandable hybrid kit is an ideal choice. This system certainly can be adapted to small homes in off-grid systems. A 400W wind generator produces about 60kWh per month in 10.5m/s average winds.
ECO-WORTHY 100 Watt 12V Mono solar panel is backed by 25-year linear power guarantee. Pure Sine Wave Inverter provides high-quality AC power equivalent to grid power to protect your household appliances and electronic equipment, especially suitable for sensitive electrical appliances.
For people looking to go off-grid, 1000W 24V hybrid kits allow you to produce energy around the clock. This way, you can decrease the size of the battery system needed to power your home during the night.
21% High Efficiency: 400W Wind Turbine Generator has a low start-up speed of 5.6mph and can withstand the maximum wind speed is 78.3 mph. Support all day power generation, with utilization rate up to 21%, which solved the problem that solar panels could not work at night or when the sun is not strong enough.
Intelligent PWM Hybrid Control: 40A hybrid charging controller, equipped with mechanical unloading resistance, adopts intelligent PWM technology to prevent battery overcharge and short circuit, to ensure the safety of the system. The controller screen displays sufficient information to facilitate understanding of system electrical parameters.
High Efficiency AC/DC Output: Using advanced 24V 3000W off-grid inverter, pure sine wave design, outputs 24V DC to 110V/120V AC, 95% high conversion efficiency, make full use of battery power without waste.
2560Wh Lithium Battery Storage: Lithium battery is the perfect upgrade of lead-acid battery. 12V 100Ah Lithium Battery Rechargeable cycles more than 3000 times, a service life more than 10 years.
Expandable: Up to 4 pieces of 100W solar panel and 2 pieces of 12V 100Ah lithium battery of the same type can be added to the system.
Package Includes
1x 400W Wind Turbine Generator
6x 100W Mono Solar Panel
1x 40A Hybrid Controller
1x 3000W 24V-110V Pure Sine Wave Inverter
1x 5M 12AWG Extension Cable with MC4
1x 9M 13AWG Wind Turbine Extension Cable
6x Z Mounting Bracket
2x Y MC4 Connector
Specifications
400W Wind Turbine Generator
| Rated voltage: 24V |
Rated wind speed: 13M/S |
| Starting wind speed: 2.0M/S |
Maximum wind speed: 50M/S |
| Blade diameter: 1.3M |
Rated power: 400W |
| Net weight: 5kg |
|
40A Hybrid Controller
| Battery system voltage level: 24V |
PV array maximum open circuit voltage: 55.2V |
| Recovery Voltage after PV array maximum open circuit voltage: 52.8V |
PV array minimum operating voltage: >Vbat+1V |
| Photovolinic rated current rating: 40A |
PV module power: ≤1000W |
| Fan rated voltage level: 24V |
Fan array maximum open circuit voltage: 51.2V |
| Fan rated current: 33A |
Wind Turbine Power: ≤800W |
| Voltage of restriction charging: Vbat>BCV+0.4V |
DC load output rated current: 30A |
100W Monocrystalline Solar Panel
| Rated Power: 100W |
Solar Cell: Monocrystalline |
| Maximum/Peak Voltage(Vmp): 20.2V |
Open Circuit Voltage(Voc): 24.5V |
| Short circuit current: 5.20A |
Maximum current: 4.95A |
| Output Tolerance: ±3% |
Temperate coefficient of Isc: (010+/-0.01)%/℃ |
| Temperate coefficient of Voc: -(0.38+/-0.01)%/℃ |
Temperature range:－40℃～ +85℃ |
| Frame: Aluminum alloy frame |
Length of extension cable: 90cm（2.95ft） |
| Size of extension cable: 4mm²（11AWG）/MC4 Connector |
Weight: 11.46 lbs(5.20 kg) |
| Size: 1010mm*460mm*35mm |
|
3000W 24V Off Grid Inverter
| Continuous output power: 3000W |
Surge power: 6000W |
| Surge current when power on: < 100A |
Output voltage: 110VAC (±3%); 120VAC (-6%~+3%);240VAC (-9%~+3%) |
| Output frequency: 50/60Hz ± 0.2% |
Output wave: Pure Sine Wave |
| Output distortion THD: THD≤3% (Resistive Load) |
Rated input voltage: 24VDC |
| Input voltage range: 21.6 ~ 32.0VDC |
Rated output efficiency: > 90.0% |
| Max. output efficiency: > 94.0% (30% loads) |
Idle current: < 0.15A |
| No-load current: < 1A |
Input terminal: M6 |
| Dimension (L x W x H): 521 × 270 × 143mm |
Mounting size: 495 × 145mm |
| Mounting hole size: Φ6mm |
Net Weight: 8.5kg |
16.4 feet 12AWG Cables
| Cable Type: Connecting Solar Panels to Charge Controller |
Rating Voltage: 600/1000V |
| Length: 5 meters（16 ft） |
Conductor: Tinned copper wire |
| AWG: 11 |
Normal Cross Sectional Area of the Conductor (mm2): 4 |
| Waterproof: IP 65 Protection |
Temperature: -40°F to +185°F |
| Connector: MC4 |
Weight: 0.742KG |
Z Mounting Brackets
| 4 pieces of Z shape solar panel brackets |
8 pieces of stainless steel nuts and cap bolts |
Y Branch Cable MC4 Connectors
| Compatible with MC4 solar connector. |
Easy installation for 2 solar panels connected in parallel. |
Buy now, pay later with Affirm. Just select 
at checkout.